QTY- 1 Mini Chopper You Weld Frame & Fork Kit.

Parts included (Frame Kit)
2- Lower Frame Rails
2- Upper Aft Ends
1-  Rear Hoop Section
1- 12"x9" Motor Mount Plate
1- 6" Lenght Neck Tube W/ Bearings
1- Backbone Support
1- Seat Post 
2- Rear Axle Flange Brackets(Live or Dead axle avail.)

2- 38" Fork Tubes
1- Drag Bars
2 -Triple Trees
2- Fork Tabs

Part#KIT12

**Only $99.99**

 QTY- 1 Mini Chopper You Weld Frame Kit.

QTY- 1 Custom Rear Axle Kit. Included are 2- 1/4" laser cut flanges, one to mount the sprocket, which has 2 bolt hole configurations. First bolt hole configuration is 4- 5/16" holes on a 2 13/16" center. Second being 4- 3/8" holes on a 2 7/8" center. Wheel flange has a standard 4 on 4" to fit most all wide tire configurations. You specify hub lenght. Hub material consist of high quality D.O.M. tubing with a 1.385" i.d. and a 1.625" o.d. with a .120" wall thickness. Part#10124

**Only $34.99**

QTY.-1-Ultimate Build Combo- Pair of Custom CNC Laser Cut Triple Trees, Rear Axle Brackets & Front Fork Tabs & 6" neck tube.Part#10031             

 **Only $45.99**

QTY.-1-Ultimate Build Combo- Pair of Custom CNC Laser Cut Triple Trees, Rear Axle Brackets & Front                                                      ForkTabs.Part#10032                                            

**Only $34.99**

 QTY.-1- Pair of Custom CNC Laser Cut Triple Trees. The hole spacing is 5 " to centers on the 1" diameter holes and the lower hole is at 1/2" for all standard setups. Part#10034                                                                                                     

**Only $10.99**

 QTY.-1- Pair of Custom CNC Laser Cut Front Fork Tabs. These will accommodate most all front bicycle rims with a 3/8" axle. Bracket is 3" high by 1 1/2" wide. Part#10035                                                                                             

**Only $7.99**

 QTY.-1- Mini Chopper Neck Tube. Neck tubes come in various sizes, ranging from the standard 6" but not limited to 6.5", 7", 7.5",8", 8.5" or 9 ". Tube is 1 3/8" I.D. and is constructed out of very heavy duty schd. 40 steel. Bearings have a 1/2" I.D. to accept all 1/2" bolts.  Part#10055                                                

                             **Only $10.99 **